| Oven,
drying machine equipment
(Non-oxygen Oven) |
|
|
|
| Features:.......................................................................... |
|
1.
|
Temperature:
Room temperature ~ 250℃（482℉） |
|
2.
|
Time
for rise in temp: Room temp.~250℃
About 20 minutes.
(No-load) |
|
3.
|
Average
temp. distribution error: at 250℃
±1%。(No-load) |
|
4.
|
Temp.
control: Automatic PID control, digital display,
and multi-stage temp. control. |
|
5.
|
Temp.
control system: SSR output in no-joint means,
excellent precision. |
|
6.
|
Material:
Inner and middle buckets SUS304#, made in Japan, positive
stainless steel plate, outside SS41#, steel plate powder-coating.
(The outside can be purchased, SUS304#, made in Japan,
positive stainless plate) |
|
7.
|
Heat
insulation: High-density imported wool thermal
insulation. |
|
|
|
|
|
|
8.
|
Airway
design: Adopts specially made, temperature resistant
and long shaft motor and powerful multiple-wing fans. The powerful
inhalation mechanism can acquire the most evenly spread temperature.
Quiet, low noise. |
|
9.
|
Heating
body: Specially made ceramic encased electric heater
for heating. Difficult to be oxidized and electric leakage |
|
10.
|
Safety
device: Overheat-prevention safety device. Protection
against overheat electricity of a motor. |
|
11.
|
Standard
accessories: A flow meter, a 4 or 6-point temp. testing
selector, an auto open/close air exhaust door, 16-stage programmable
temp. controller. |
|
12.
|
Optional accessories: A
temp. recorder, 4 or 6-point temp. display, 4-color indicator. |
|
Application:
Products such as: curing, adhering, moulding, drying, dip-coating,
tempering, powder shaping, pre-heating, shaping and processing,
and other purposes in electronics industry, electric industry,
communication instruments and materials, electroplating industry,
battery industry, metal processing industry, chemical engineering
industry, printing industry, PCB industry, dip-coating, among
many other industries.
Applicable features:
To prevent metal materials such as copper and aluminum from
resulting in oxidization during tempering and stress removing
process; and to prevent low ignition-point objects from burning
at high temperatures, and prevent printing, PC boards, LEDs,
etc. from oxidizing during a curing process. |
|
| (CIGO)
Non-oxygen Oven |
|
Type
|
CIGO-1
|
CIGO-2
|
CIGO-3
|
CIGO-4
|
|
Interior size
W x D x H(mm)
|
450x400x400
|
600x500x600
|
600x500x900
|
700x800x1200
|
|
Exterior size
W x D x H(mm)
|
620x520x520
|
870x580x1280
|
870x680x1580
|
960x960x1920
|
|
Voltage (KVA) max kw
|
3
|
5
|
6
|
14
|
|
Exterior voltage
(AC)
|
Available for voltages in every country
such as 110V/220V/240V/380V/415V/440V, etc. 1HP/3HP(50/60)HZ
|
|
Door type
|
1
|
1
|
1
|
1
|
|
Frame (level)
|
3
|
4
|
6
|
8
|
|
Air flow input
|
MAX:25 1/min. (at 5 kg/c ㎡) N2,
CO2
|
|
Control panel
|
Independent control on the upper level
|
|
Temperature range
|
Non-oxygen oven: the oxygen content can
reach 50PPM below. The CIGO-2 above temperature range can
select Max500°C（932℉）
|
|
|
