LED Moulding and Curing Heating Tank

LED Vacuum Stirring Machine
°ª·Å«¬
Features:
 
1. Temp. range: Room temp. ~ 200¢J(392¢K).
2. Time for rise in temp.: Room temp. ~ 200
¢J, about 20min. (No-load)
3. Average temp. distribution error: at 200
¢J ¡Ó1¢M. (No-load)
4. Vacuum level: At 0.18 TORR below, the material can be de-foamed under high vacuum.
5. Temp. control means: Digital display, and multi-stage temp. control.
6. Temp. control system: Output in no-joint means (SCR) with an excellent precision.
7. Material: Inner and middle bucket SUS304#, outside SS41#, steel plate powder-coating.
8. Heat insulation: High-density imported wool thermal insulation.
9. Heating design: Adopts indirect heating means.
10. Heating body: Specially made ceramic encased electric heater for heating. Difficult to be oxidized and electric leakage.
Application:
 
Products such as curing, moulding, drying, aging, tempering, pre-heating, shaping and processing, and other purposes in electronics industry, electric industry, rubber industry, chemical engineering industry, metal spraying industry, dip-coating, paper-making industry, etc.
(CVC) LED Vacuum Stirring Machine
Model
CVC-2
CVC-3
Interior W¡ÑD¡ÑH (¢P)
440¡Ñ400¡Ñ500
320¡Ñ320¡Ñ420
Exterior W¡ÑD¡ÑH(¢P)
680¡Ñ640¡Ñ980
560¡Ñ460¡Ñ1400
Power (KVA)
3.6
3.6
Outside Power Source(AC)
Voltages available for each countries such as
220V/240V/380V/415V/440V, etc., 3PH (50/60) Hz
Door Type
1
1
Shelf (layer)
3 layer / stirring
2 layer / stirring
Vacuum level
0.45 ~ 0.18 TORR below
Control level
Upper independent control